How to Adjust DJI Avata (Step-by-Step Guide)– Droneblog

Is your DJI Avata electronic camera gimbal wobbling? Or, is the Avata carrying out irregular motions according to the command inputs? Maybe your Avata is hovering without stability?

Then your Avata requires a calibration.

To adjust your DJI Avata, take note of the signs and the Safety glasses triggers. According to them, you ought to finish a Vision System, Compass, IMU, Gimbal, or Movement Controller calibration.

The treatment is uncomplicated however can be complicated. That’s why we established this detailed guide you ought to follow to carry out each calibration properly.

Keeping your drone adjusted is as required as flying with a charged battery.

An uncalibrated part can be the tipping point that makes your drone crash with no description.

Without additional ado, here’s how to adjust Avata.

Vision System calibration

Beginning with the Vision System that assists your Avata hover stably, this function is a need to when the GNSS system is not available in Handbook or Sport Modes.

If they are uncalibrated, the Avata will not understand its position. This suggests Avata will hover unpredictably, moving to the sides.

Likewise, Avata can’t self-correct its position when the wind moves it, altering its position without observing.

It likewise enables the car brake when you launch the accelerator.

With this module working unpredictably, the airplane will stop speeding up when the wind resistance stops it, so it can crash or get lost.

Your Avata will auto-calibrate, repairing this problem the majority of the time.

Nevertheless, there are events when you require a deep calibration of the system.

Advanced calibration– DJI Assistant 2 (Customer Drone Series)

  1. Power on the Avata.
  2. Disconnect the USB-C/microSD Card Slot Cover to access the USB-C Avata port.
  3. Link the USB-C to USB-C cable television to the Avata.
  4. Link the other USB-C end to your computer system. If your computer system does not have a USB-C port, you should get a USB-C to USB-A adapter.
  5. Open the DJI Assistant 2 (Customer Drone Series).
  6. When this software application finds the Avata, choose DJI Avata.
  7. Click the Calibration choice from the vertical menu left wing.
  8. A directed video on how to carry out the calibration appears. Enjoy it thoroughly, and follow its guidelines.
  9. Point the down sensing units to your computer system screen, and follow the motion pattern.
  10. The Assistant 2 (Customer Drone Series) begins the calibration.
  11. Detach the Avata from the PC and USB-C cable television once the calibration is total.
  12. Protect the USB-C/microSD Card Slot Cover.
  13. And lastly, power off the Avata to end up the calibration.

Compass calibration

This module assists Avata understand its instructions in the air. It likewise impacts the airplane’s self-positioning.

Without GNSS, an uncalibrated Compass disables security functions like the automated Failsafe RTH, as it will not understand in which instructions is the House Point.

You carry out the Compass calibration through the Safety glasses OSD. So let’s begin with the Safety glasses 2.

  1. Power on Avata, Safety glasses 2, and RC to match them.
  2. Swipe your finger forward on the touch panel to access the Menu.
  3. Swipe your finger to choose the Security choice.
  4. Try To Find the Airplane Compass Calibration choice on the Security choice.
  5. Tap the touch screen to gain access to it.
  6. The calibration begins and will trigger a message when it is total.
  7. Swipe your finger backwards on the touch panel up until you leave the Menu.

With the FPV Safety Glasses V2:

  1. Power on Avata, FPV Safety Glasses V2, and RC to match them.
  2. Press the Safety glasses joystick to access the Menu.
  3. Move the joystick to choose the Security choice.
  4. Try To Find the Airplane Compass Calibration choice on the Security choice.
  5. Press the joystick to gain access to it.
  6. The calibration begins and will trigger a message when it is total.
  7. Press the Back button up until you leave the Menu.

IMU calibration

This module is accountable for the maneuverability of the Avata.

An uncalibrated IMU will make your Avata carry out maneuvers you have not input with the Movement Controller or FPC Remote Controller 2.

Let’s state the Avata carried out a flip. With an uncalibrated IMU, the Avata can half-flip or roll without observing, losing control.

So it’s necessary to have it on point, according to the treatment listed below. Initially, let’s inspect the actions for Safety glasses 2.

  1. Power on Avata, Safety glasses 2, and RC to match them.
  2. Swipe your finger forward on the touch panel to access the Menu.
  3. Swipe your finger to choose the Security choice.
  4. Try To Find the Airplane IMU Calibration choice on the Security choice.
  5. Tap the touch screen to gain access to it and tap it once again to choose Start.
  6. Follow the Safety glasses OSD treatment to adjust the IMU.
  7. The Safety glasses will trigger a message when the IMU calibration is total.
  8. Swipe your finger backwards on the touch panel up until you leave the Menu.

With the FPV Safety Glasses V2:

  1. Power on your Avata, FPV Safety Glasses V2, and RC to match them.
  2. Press the Safety glasses joystick to access the Menu.
  3. Move the joystick to choose the Security choice.
  4. Try To Find the Airplane IMU Calibration choice on the Security choice.
  5. Press the joystick to gain access to it and push it once again to choose Start.
  6. Follow the Safety glasses OSD treatment to adjust the IMU.
  7. The Safety glasses will trigger a message when the IMU calibration is total.
  8. Press the Back button up until you leave the Menu.

Gimbal calibration

Have you found out about the Jello Impact?

It explains a cam vibration, taping videos with lots of unwanted motions.

Avata believes this threatens as the electronic camera works as our navigation view. If we can’t see our environments, we are going to crash.

We require to remove this wobbling. Among its causes it’s an uncalibrated gimbal.

To adjust the gimbal from the Safety glasses 2:

  1. Get rid of the gimbal cover from the Avata.
  2. Location the Avata on a flat surface area.
  3. Power on your Avata, Safety glasses 2, and RC to match them.
  4. Swipe your finger forward on the touch panel to access the Menu.
  5. Swipe your finger to choose Settings and after that the Control choice.
  6. On the Control choice, search for the Gimbal Calibration choice.
  7. Tap the touch screen to gain access to it, then tap the automobile button.
  8. The Safety glasses will trigger a message when the gimbal calibration is total.
  9. Swipe your finger backwards on the touch panel up until you leave the Menu.

From the FPV Safety Glasses V2:

  1. Get rid of the gimbal cover.
  2. Location the Avata on a level surface area.
  3. Power on Avata, FPV Safety Glasses V2, and RC to match them.
  4. Press the Safety glasses joystick to access the Menu.
  5. Move the joystick to choose Settings, and after that the Control choice.
  6. On the Control choice, search for the Gimbal Calibration choice.
  7. Press the joystick to gain access to it and push the automobile button.
  8. The Safety glasses will trigger a message when the IMU calibration is total.
  9. Press the Back button up until you leave the Menu.

Movement Controller calibration

An uncalibrated Movement Controller will hinder you from managing the Avata as normal.

The accelerator can work faultily, not including adequate throttle or including excessive, and the Avata ends up being tough to navigate as its motions do not match your commands.

It’s vital to have it constantly adjusted per the actions listed below.

  1. Get rid of the gimbal cover from your Avata.
  2. Location the Avata on a flat, level surface area.
  3. Power on Avata, Safety glasses 2, and RC to match them.
  4. Swipe your finger forward on the touch panel to access the Menu.
  5. Swipe your finger to choose Settings and after that the Control choice.
  6. On the Control choice, search for the Movement Calibration choice.
  7. Tap the touch screen to choose the RC module you wish to adjust. You can choose the IMU, Compass, and accelerator.
  8. The Safety glasses will trigger a message when the calibration is total.
  9. Swipe your finger backwards on the touch panel up until you leave the Menu.

Or, if you utilize the FPV Safety glasses V2:

  1. Get rid of the cover from the Avata.
  2. Location the Avata on a flat surface area.
  3. Power on Avata, FPV Safety Glasses V2, and RC to match them.
  4. Press the Safety glasses joystick to access the Menu.
  5. Move the joystick to choose Settings and after that the Control choice.
  6. On the Control choice, search for the Movement Calibration choice.
  7. Press the joystick to choose the RC module you wish to adjust. You can choose the IMU, Compass, and accelerator.
  8. The Safety glasses will trigger a message when the IMU calibration is total.
  9. Press the Back button up until you leave the Menu.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: